Description
PoE Splitter
Introduction
PoE Splitter is compliant with IEEE802.3af standard, which can split data and power from PoE signal. It perfect match camera enclosure and can split Ethernet and power from ethernet cable for these device which can not support PoE. It can work with standard PoE Switch or PSE device, compatible with mid-span and end-span, output 12V/1.1A power by DC terminal, It is widely used in security surveillance and network project.
Features
- IEEE 802 3af Power over Ethernet Standard Compliance;
- Compatible with mode A (End-Span) and mode B (Mid-Span);
- 12V /1.1A DC Power Output;
- Excellent circuit isolation protection;
- More than 82% conversion efficiency.
Board Diagram
Specification
| Item | Description | |
| PoE | Protocol | IEEE803.2af |
| Mode | Support Mode A (End-Span) and Mode B (Mid-Span) | |
| Input | PoE 36V～57V | |
| Output | DC 12V,≤13W | |
| Ethernet | Port | 1 x RJ45 Input |
| Transmission Speed | 10/100Mbps | |
| Transmission Medium | Cat5/5e/6 Standard Network Cable | |
| Distance | 100m (Max.) | |
| Status | LED Indicator | Yellow:PoE，Green:DC OUT |
| Protection | Surge | 3 level ，Standard：IEC61000-4-5 |
| ESD | 3 level ，Standard：IEC61000-4-2 | |
| Enviroment | Working Temperature | -30 C~60 C |
| Storage Temperature | -40 C~85 C | |
| Humidity (Non-condensing) | 0~95% | |
| Mechanics | Dimension (L x W x H) | 260mm×36mm×26mm |
| Material | Plastic | |
| Color | Black | |
| Weight | 42g | |
(*) Made in China
